power crimp head for crimp dies and locator kits doc no: ats-638160300 release date: 04-01-10 ucotrolledcopy page 1 of 3 revision: a revision date: 04-01-10 powercrimphead forbatterypoweredcrimptools specificationsheet ordero.638160300 features quick change power crimp head is easily installed into battery power crimp tool (order no. 63816-0200) powered crimp tools help reduce fatigue and discomfort from repetitive manual crimping and allows portability a precision user-friendly terminal locator wire stop holds terminals i n the proper crimping position scope the 63816-0300 power crimp head was created for use with select crimp dies and locator kits when used with the battery powered tool (order no. 63816-0200). installation to install the power crimp head onto the battery powered tool, (order no. 63816-0200), ref er to the instruction manual tm-638160200, section 3, set-up and adjustments. to install the crimp dies and locator kits into the power crimp head, ref er to the specification sheet manual that is supplied with each kit. cautio: never place fingers into the tooling nest. maintenance it is recommended that each operator of the tool be made aware of, and responsible for, the following maintenance steps: 1. remove dust, moisture and other contaminants with a clean brush, or soft, lint-free cloth. 2. do not use any abrasive materials that could damage the tool. 3. make certain all pins, pivot points and bearing surfaces in the tool head are protected with a thin coat of high quality machine oil. do not oil excessively. this tool was engineered for durability, but like any fine piece of equipment, it needs cleaning and lubrication for a maximum service life of trouble-free crimping. the use of a light oil, such as sae 30 weight automotive oil, every 5,000 crimps or monthly, will significantly enhance the tool life and ensure a stable calibration. see figure 1 for lubrication points. 4. store the tool in a clean and dry area when not in use. lubrication points (both sides) light oil (every month or 5,000 crimps) figure 1
power crimp head for crimp dies and locator kits doc no: ats-638160300 release date: 04-01-10 ucotrolledcopy page 2 of 3 revision: a revision date: 04-01-10 warranty this tool is for electrical terminal crimping purposes only. this tool is m ade of the best quality materials. all vital components are long life-tested. all tools are wa rranted free of manufacturing defects for a period of 30days. should such a defect occur, we will repair or exchange the tool free of charge. this repair or exchange will not be applicable to alter, misused, or dama ged tools. partslist ite m order o description quanti ty 1 63816- 0300 power crimp head 1 2 63811- 4773 universal locator mount 1 americas headquarters lisle, illinois 60532 u.s.a. 1-800-78molex amerinfo@molex.com far east north headquarters yamato, kanagawa, japan 81-462-65-2324 far east south headquarters jurong, singapore 65-6-268-6868 fesinfo@molex.com european headquarters munich, germany 49-89-413092-0 eurinfo@molex.com corporate headquarters 2222 wellington ct. lisle, il 60532 u.s.a. 2 figure 2 1 m4 x 8 long bhsc (ref)
power crimp head for crimp dies and locator kits doc no: ats-638160300 release date: 04-01-10 ucotrolledcopy page 3 of 3 revision: a revision date: 04-01-10 feninfo@molex.com 630-969-4550 fax: 630-969-1352 visit our web site at http://www.molex.com
|
